ABOUABDELLAH et al., 2011 IESM2011Paper121 ABOUABDELLAH, A., AGUEZZOUL, A., and CHERKAOUI, A. (2011). Application of software engineering methods for modeling the patient empowerment process with cancer. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 1542 -- 1548, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. AGRAWAL and HENGSTLER, 2011 IESM2011Paper58 AGRAWAL, D. and HENGSTLER, C. (2011). A condition base maintenance system for energy efficiency in manufacturing. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 946 -- 955, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. AMJAD et al., 2011 IESM2011Paper135 AMJAD, F., ROY, D., and ANCIAUX, D. (2011). Description logic based decision support for integrating suppliers with product in networked supply chain. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 809 -- 817, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. ANDRÉ et al., 2011 IESM2011Paper213 ANDRÉ, V., GRANGEON, N., NORRE, S., and PHILIPPE, F. (2011). A combination metaheuristic-simulation for solving a transportation problem in a hospital environment. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 395 -- 406, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. ANGOUA et al., 2011 IESM2011Paper145 ANGOUA, B. A., ROSE, B., REMITA, H., and CAILLAUD, E. (2011). Combining organisational performance with sustainable development issues: empirical evidence from lean and green project. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 448 -- 457, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. ATAHRAN et al., 2011 IESM2011Paper124 ATAHRAN, A., LENTÉ, C., and T'KINDT, V. (2011). Solution of a multicriteria dial-a-ride problem with an ecological measure and heterogeneous vehicles. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 1233 -- 1242, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. AUDET et al., 2011 IESM2011Paper159 AUDET, M., MONTREUIL, B., and LABARTHE, O. (2011). Exploring the potential of retail customer demand analytics for supply decision support. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 926 -- 936, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. AUDY et al., 2011 IESM2011Paper46 AUDY, J.-F., HACHEMI, N. E., MICHEL, L., and ROUSSEAU, L.-M. (2011). Solving a combined routing and scheduling problem in forestry. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 50 -- 59, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. AYED et al., 2011 IESM2011Paper206 AYED, S., DELLAGI, S., and REZG, N. (2011). Integrated maintenance optimization with random demand and subcontracting constraint. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 988 -- 997, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. AZIZMOHAMMADI et al., 2011 IESM2011Paper62 AZIZMOHAMMADI, R., TAVAKKOLI-MOGHADDAM, R., HADIPOUR, H., and SIADAT, A. (2011). Application of RSM, fuzzy regression and simulated annealing for evaluating of effective factors in vehicle brake drum assembling process. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 407 -- 417, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. AZOUZI and D'AMOURS, 2011 IESM2011Paper185 AZOUZI, R. and D'AMOURS, S. (2011). Standards for information and knowledge sharing in the collaborative design of planning systems within the forest products industry: a survey and roadmap. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 477 -- 486, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. BABAI et al., 2011 IESM2011Paper79 BABAI, M. Z., ALI, M. M., BOYLAN, J. E., and SYNTETOS, A. (2011). Forecasting and inventory performance in a two-stage supply chain with ARIMA(0,1,1) demand. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 647 -- 656, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. BALLOT et al., 2011 IESM2011Paper158 BALLOT, E., MONTREUIL, B., and FONTANE, F. (2011). Topology of logistic networks and the potential of a physical internet. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 585 -- 594, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. BALMA et al., 2011 IESM2011Paper192 BALMA, A., HADJ-ALOUANE, A. B., and HADJ-ALOUANE, N. B. (2011). A multi-commodity flow model for integrated design and routing in intelligent networks. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 1271 -- 1279, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. BARBOSA and LEITÃO, 2011 IESM2011Paper87 BARBOSA, J. and LEITÃO, P. (2011). Enhancing service-oriented holonic multi-agent systems with self-organization. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 1373 -- 1381, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. BASHIR et al., 2011 IESM2011Paper183 BASHIR, B., CAUX, C., CHABROL, M., and GOURGAND, M. (2011). An unified approach for home care and health care systems. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 1549 -- 1558, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. BAUD-LAVIGNE et al., 2011 IESM2011Paper119 BAUD-LAVIGNE, B., AGARD, B., and PENZ, B. (2011). A MILP model for joint product family and supply chain design. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 889 -- 897, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. BELAID et al., 2011 IESM2011Paper143 BELAID, R., T'KINDT, V., and ESSWEIN, C. (2011). Decomposition algorithms for planning the production of a real shampoo industry. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 144 -- 153, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. BELMANSOUR and NOURELFATH, 2011 IESM2011Paper131 BELMANSOUR, A.-T. and NOURELFATH, M. (2011). Prodlinesim: a simulation engine for multistate production lines. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 164 -- 173, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. BENYOUCEF et al., 2011 IESM2011Proceedings BENYOUCEF, L., TRENTESAUX, D., ARTIBA, A., and REZG, N., editors (2011). Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. BERTHAUT et al., 2011 IESM2011Paper97 BERTHAUT, F., GRÈZE, L., PELLERIN, R., PERRIER, N., and HAJJI, A. (2011). Optimal resource-constraint project scheduling with overlapping modes. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 299 -- 308, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. BESBES et al., 2011 IESM2011Paper114 BESBES, K., ALLAOUI, H., and GONCALVES, G. (2011). Supply chain design under uncertainty on product life cycle. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 666 -- 674, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. BORANGIU et al., 2011 IESM2011Paper102 BORANGIU, T., RĂILEANU, S., ANTON, F., PÂRLEA, M., TAHON, C., BERGER, T., and TRENTESAUX, D. (2011). Product-driven automation in a service oriented manufacturing cell. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 1392 -- 1401, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. BOUCHERY et al., 2011 IESM2011Paper22 BOUCHERY, Y., GHAFFARI, A., JEMAI, Z., and DALLERY, Y. (2011). How to incorporate sustainability criteria into operations management models? the sustainable order quantity example. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 675 -- 684, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. BOUCHIBA et al., 2011 IESM2011Paper3 BOUCHIBA, A., CHERKAOUI, A., KOBI, A., and BARREAU, M. (2011). Evaluating dysfunction of level crossing by bayesian approach. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 1029 -- 1039, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. BOUGUERRA et al., 2011 IESM2011Paper175 BOUGUERRA, S., REZG, N., and CHELBI, A. (2011). A decision model for adopting an extended twodimensional warranty region under different maintenance policies. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 1141 -- 1151, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. BOUZEMBRAK et al., 2011 IESM2011Paper120 BOUZEMBRAK, Y., ALLAOUI, H., GONCALVES, G., and BOUCHRIHA, H. (2011). Distribution supply chain design under demand uncertainty. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 657 -- 665, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. BRAHIM-DJELLOUL et al., 2011 IESM2011Paper180 BRAHIM-DJELLOUL, S., ESTAMPE, D., and LAMOURI, S. (2011). Real-time information management in supply chain modeling tools. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 837 -- 847, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. BRICHA and NOURELFATH, 2011 IESM2011Paper4 BRICHA, N. and NOURELFATH, M. (2011). Facility protection strategies against intentional attacks. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 1183 -- 1192, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. CASTANIER and LEMOINE, 2011 IESM2011Paper25 CASTANIER, B. and LEMOINE, D. (2011). A preliminary integrated model for optimizing tactical production planning and condition-based maintenance. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 998 -- 1007, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. CHEUTET et al., 2011 IESM2011Paper202 CHEUTET, V., LAMOURI, S., and DERROISNE, R. (2011). Proposition of a framework for consistency management between digital factory simulations. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 497 -- 506, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. CHOUIKHI et al., 2011 IESM2011Paper168 CHOUIKHI, H., KHATAB, A., and REZG, N. (2011). A maintenance policy for a production system under environment constraints. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 1060 -- 1069, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. CHUNG et al., 2011 IESM2011Paper9 CHUNG, C.-S., FLYNN, J., and SANG, J. (2011). An efficient branch and bound search strategy for permutation flowshop problems. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 40 -- 49, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. CLIVILLÉ et al., 2011 IESM2011Paper208 CLIVILLÉ, V., BERRAH, L., MONTAIN, J., and MAURIS, G. (2011). A performance aggregation model for choosing a set of actions in a PETRA industrial improvement approach. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 232 -- 241, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. da CUNHA et al., 2011 IESM2011Paper161 da CUNHA, J., de SOUZA, M., and YANASSE, H. (2011). Scheduling jobs on a flexible machine to minimize overtime and weighted tardiness costs. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 121 -- 125, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. DAI and CHEN, 2011 IESM2011Paper127 DAI, B. and CHEN, H. (2011). A profit allocation mechanism for carriers’ collaboration in less than truckload transportation. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 867 -- 876, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. DANG et al., 2011 IESM2011Paper92 DANG, Q.-V., NIELSEN, I., and YUN, W.-Y. (2011). Policies for positioning empty containers in an inland multi-depot system. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 66 -- 75, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. DAOUD et al., 2011 IESM2011Paper101 DAOUD, S., YALAOUI, F., AMODEO, L., and CHEHADE, H. (2011). Ant colony optimization to solve a robotic assembly line balancing problem (rALB-II). In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 23 -- 31, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. DARMOUL et al., 2011 IESM2011Paper17 DARMOUL, S., PIERREVAL, H., and HAJRI-GABOUJ, S. (2011). An immune inspired multi agent system to handle disruptions in manufacturing production systems. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 1402 -- 1411, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. DENIAUD et al., 2011 IESM2011Paper75 DENIAUD, I., LERCH, C., and CAILLAUD, E. (2011). Eco-design of complex products using system engineering. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 427 -- 436, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. DHIB et al., 2011 IESM2011Paper115 DHIB, C., NÉRON, E., and SOUKHAL, A. (2011). Project scheduling in an industrial context. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 316 -- 325, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. DHINGRA and CHANDNA, 2011 IESM2011Paper71 DHINGRA, A. K. and CHANDNA, P. (2011). Analysis of hybrid genetic algorithms for SDST flow shop scheduling with multiple objectives. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 350 -- 360, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. DHOUIB et al., 2011 IESM2011Paper112 DHOUIB, D., ELLOUMI, S., and ADDOUCHE, S.-A. (2011). A new multicriteria approach for EOL product strategy. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 517 -- 526, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. DIALLO and AÏT-KADI, 2011 IESM2011Paper221 DIALLO, C. and AÏT-KADI, D. (2011). Optimal mixture strategy of two identical subpopulations with different ages. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 1152 -- 1161, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. DRIRA et al., 2011 IESM2011Paper188 DRIRA, A., PIERREVAL, H., and HAJRI-GABOUJ, S. (2011). Degradation of the available information over time in layout design: a fuzzy evolutionary approach. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 184 -- 193, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. DUBEDOUT et al., 2011 IESM2011Paper45 DUBEDOUT, H., CUNG, V.-D., DEJAX, P., NEAGU, N., and YEUNG, T. (2011). Robust optimization of inventory routing for bulk gas distribution. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 1321 -- 1330, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. DUBROMELLE et al., 2011 IESM2011Paper157 DUBROMELLE, Y., OUNNAR, F., PRUNARET, J.-P., and PUJO, P. (2011). Service oriented architecture in PROSIS holonic control. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 1382 -- 1391, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. D’ADDONA and TETI, 2011 IESM2011Paper173 D’ADDONA, D. and TETI, R. (2011). Cutting tool image data processing for automatic tool wear recognition through artificial neural networks. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 387 -- 394, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. ELMAGHRABY and RAJNEESH, 2011 IESM2011Paper81 ELMAGHRABY, S. and RAJNEESH, R. (2011). The state space in stochastic activity networks: worst case performance bound of the T-1 heuristic. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 309 -- 315, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. ERKAYMAN et al., 2011 IESM2011Paper34 ERKAYMAN, B., GUNDOGAR, E., IPEK, M., and BOLUKBAS, O. F. (2011). A hybrid fuzzy decision making approach for provider selection in third-party logistics. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 818 -- 826, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. ERNEZ et al., 2011 IESM2011Paper187 ERNEZ, I., YOUSSEF, K. H., and JEMAI, Z. (2011). Optimal admission policy in make-to-stock/ make-to-order production systems. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 134 -- 143, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. FAKHFAKH et al., 2011 IESM2011Paper151 FAKHFAKH, M., MASCOLO, M. D., FREIN, Y., FINKE, G., and COLLARDEY, M. (2011). Scheduling of an engine assembly workshop. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 113 -- 120, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. FINK et al., 2011 IESM2011Paper30 FINK, M., BELTON, V., and WIDMER, M. (2011). Multi-stage, multi-criteria framework supporting supplier selection and outsourcing decisions of core product to collaborative supplier. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 744 -- 753, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. FRÄMLING et al., 2011 IESM2011Paper137 FRÄMLING, K., LOUKKOLA, J., NYMAN, J., and KAUSTELL, A. (2011). Intelligent products in real-life applications. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 1343 -- 1351, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. GOREN and PIERREVAL, 2011 IESM2011Paper77 GOREN, S. and PIERREVAL, H. (2011). Hybrid flow shop scheduling with several users. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 898 -- 907, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. GOSSART et al., 2011 IESM2011Paper199 GOSSART, D., MESKENS, N., and GUINET, A. (2011). Strategic decision-maker requirements for hospital bed managers. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 1559 -- 1568, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. GOUDENEGE et al., 2011 IESM2011Paper85 GOUDENEGE, G., JEMAI, Z., and CHU, C. (2011). Reverse logistics optimization : application to reusable containers. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 527 -- 536, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. GUTIERREZ-FRANCO et al., 2011 IESM2011Paper80 GUTIERREZ-FRANCO, E., MONTOYA-TORRES, J. R., BLANCO, E., and MEJÍA, D. (2011). Measuring carbon footprint in an agro-industrial supply network. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 685 -- 692, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. HACHANI et al., 2011 IESM2011Paper93 HACHANI, S., GZARA, L., and VERJUS, H. (2011). Support of business processes flexibility in PLM systems using services based approach. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 547 -- 555, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. HAJEJ et al., 2011 IESM2011Paper210 HAJEJ, Z., DELLAGI, S., and REZG, N. (2011). Developments of integrated maintenance policy based on the functional age with withdrawal right. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 968 -- 977, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. HAJJI et al., 2011 IESM2011Paper220 HAJJI, A., GHARBI, A., and REKIK, M. (2011). Decision support system for production and supplier selection in unreliable supply chains. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 722 -- 731, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. HAKIMI et al., 2011 IESM2011Paper196 HAKIMI, D., MONTREUIL, B., and LABARTHE, O. (2011). A conceptual framework for designing non-programmed decision support systems in the context of supply webs. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 595 -- 604, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. HAMDI-DHAOUI et al., 2011 IESM2011Paper146 HAMDI-DHAOUI, K., LABADIE, N., and YALAOUI, A. (2011). A memetic algorithm for the two-dimensional bin-packing problem with partial conflicts. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 371 -- 379, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. HAZIR and DOLGUI, 2011 IESM2011Paper84 HAZIR, O. and DOLGUI, A. (2011). Simple assembly line balancing under uncertainty: a robust approach. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 87 -- 92, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. HERRERA et al., 2011 IESM2011Paper178 HERRERA, C., THOMAS, A., BELMOKHTAR, S., and PANNEQUIN, R. (2011). A viable system model for product-driven systems. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 1454 -- 1463, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. HOUSSIN and COULIBALY, 2011 IESM2011Paper125 HOUSSIN, R. and COULIBALY, A. (2011). Safety-based availability assessment in mechanical design. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 1162 -- 1173, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. IANNONI et al., 2011a IESM2011Paper26 IANNONI, A. P., JEMAI, Z., CHOLLET-XEMARD, C., and MARTY, J. (2011a). Analysis of an urban emergency medical system by using discrete simulation. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 1514 -- 1523, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. IANNONI et al., 2011b IESM2011Paper99 IANNONI, A. P., SAHIN, E., VIDAL, L. A., and BONAN, B. (2011b). An optimization method applied to the production planning of chemotherapy drugs in a hospital pharmacy. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 1505 -- 1513, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. ISHIZAKA and PEARMAN, 2011 IESM2011Paper72 ISHIZAKA, A. and PEARMAN, C. (2011). AHPsort for supplier base reduction. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 799 -- 808, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. IVANESCU et al., 2011 IESM2011Paper23 IVANESCU, A. N., BORANGIU, T., ROSU, A., and PÂRLEA, M. (2011). A PLC-based control solution for a holonic planned manufacturing system. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 1412 -- 1422, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. JAKJOUD et al., 2011 IESM2011Paper50 JAKJOUD, A., AYADI, A., BARON, C., and ZRIKEM, M. (2011). SysPEM: a sysML and SPEM based process modeling language for systems engineering. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 467 -- 476, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. JALLOUF et al., 2011 IESM2011Paper89 JALLOUF, S., SCHMITT, C., and PLUVINAGE, G. (2011). The policy of maintenance of drinking water networks subjected to water hammer. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 1020 -- 1028, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. JEBALI and ANIBA, 2011 IESM2011Paper203 JEBALI, A. and ANIBA, S. (2011). A stochastic approach for operating room planning with uncertain surgical case durations. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 1496 -- 1504, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. JIMENEZ et al., 2011 IESM2011Paper191 JIMENEZ, C., DAUZÈRE-PÉRÈS, S., FEUILLEBOIS, C., and PAULY, E. (2011). Simulation of aircraft maintenance improvement using RFID systems. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 1089 -- 1099, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. KAMMOUN et al., 2011 IESM2011Paper78 KAMMOUN, M. A., SAVA, A., and REZG, N. (2011). A method for air traffic rescheduling based on ground delay, rerouting and flight canceling. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 624 -- 634, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. KHODAVERDI and OLFAT, 2011 IESM2011Paper12 KHODAVERDI, R. and OLFAT, L. (2011). A fuzzy MCDM approach for supplier selection and evaluation:a case study in an automobile manufacturing company. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 732 -- 743, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. KLIBI and MARTEL, 2011 IESM2011Paper217 KLIBI, W. and MARTEL, A. (2011). Scenario-based supply network design under disruptions. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 712 -- 721, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. KOMBAS et al., 2011 IESM2011Paper166 KOMBAS, A., BABAI, M. Z., and VALLESPIR, B. (2011). Exploring the benefits of using the RFID technology in road-based goods transportation processes. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 1433 -- 1443, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. KOULOUGHLI et al., 2011 IESM2011Paper154 KOULOUGHLI, S., SARI, Z., and SARI, T. (2011). Optimization of two dimensions of a multi- aisle AS/RS with fixed third dimension. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 248 -- 258, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. KUBLER et al., 2011 IESM2011Paper133 KUBLER, S., DERIGENT, W., THOMAS, A., and RONDEAU, E. (2011). Prototyping of a communicating textile. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 1333 -- 1342, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. KUJAWSKI and SWIATEK, 2011 IESM2011Paper105 KUJAWSKI, K. and SWIATEK, J. (2011). The collision elimination algorithm in the hoist scheduling problem. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 635 -- 644, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. LABADIE et al., 2011 IESM2011Paper138 LABADIE, N., MELECHOVSKÝ, J., and PRINS, C. (2011). An evolutionary algorithm for the bi-objective multiple traveling salesman problem. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 1253 -- 1260, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. LACOMME et al., 2011 IESM2011Paper164 LACOMME, P., KEMMOE, S., TCHERNEV, N., and QUILLIOT, A. (2011). Mathematical formulation of the supply chain with cash flow per production unit modelled as job-shop. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 93 -- 102, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. LAHYANI et al., 2011 IESM2011Paper65 LAHYANI, R., KHEMAKHEM, M., CHABCHOUB, H., and SEMET, F. (2011). Rich vehicle routing problem: model and experimental design analysis. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 1300 -- 1310, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. LEE and PRABHU, 2011 IESM2011Paper142 LEE, S. and PRABHU, V. V. (2011). Real-time feedback control for production, maintenance, and capacity. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 1464 -- 1473, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. LEGAT et al., 2011 IESM2011Paper59 LEGAT, C., HUBAUER, T. M., and SEITZ, C. (2011). Integrated diagnosis for adaptive service-oriented manufacturing control with autonomous products. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 1363 -- 1372, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. LEMIEUX et al., 2011 IESM2011Paper134 LEMIEUX, A.-A., CARBONE, V., LAMOURI, S., and PELLERIN, R. (2011). Agile supply chain in the fashion industry: a literature review. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 702 -- 711, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. LI et al., 2011a IESM2011Paper7 LI, J., FONDREVELLE, J., and GUINET, A. (2011a). A strategic mathematical model with sustainable development thinking for global relocation decision. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 693 -- 701, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. LI et al., 2011b IESM2011Paper116 LI, X., CHEHADE, H., YALAOUI, F., and AMODEO, L. (2011b). Simulation-based-optimization to solve a multiobjective hybrid flowshop scheduling problem. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 174 -- 183, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. LOUKAS, 2011 IESM2011Paper49 LOUKAS, D. (2011). Suppliers selection using multivariate data analysis and multicriteria analysis methods. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 827 -- 836, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. LUTZ et al., 2011 IESM2011Paper19 LUTZ, M., BOUCHER, X., ROUSTANT, O., and GIRARD, M.-A. (2011). Capacity planning of a semi-conductor manufacturing information system: building a n-parameters tree-structured regression model through data analysis. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 154 -- 163, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. MAAROUFI et al., 2011 IESM2011Paper216 MAAROUFI, G., CHELBI, A., REZG, N., and AÏT-KADI, D. (2011). A nearly optimal inspection policy for a two-component series system. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 956 -- 967, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. MARDAN et al., 2011 IESM2011Paper54 MARDAN, E., TAVAKKOLI-MOGHADDAM, R., and TABRIZI, B. H. (2011). A mixed-integer programming model for parallel machine scheduling with controllable processing time. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 60 -- 65, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. MASCLE et al., 2011 IESM2011Paper189 MASCLE, C., BAPTISTE, P., and LATRÉMOUILLE-VIAU, J. (2011). Management of airframe disassembly and dismantling for reusing, remanufacturing and recycling. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 1110 -- 1119, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. MASMOUDI, 2011 IESM2011Paper106 MASMOUDI, M. (2011). Forecasting returns in reverse logistics: application to catalog and mail-order retailing. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 507 -- 516, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. MASMOUDI and HAÏT, 2011 IESM2011Paper193 MASMOUDI, M. and HAÏT, A. (2011). Fuzzy capacity planning for an helicopter maintenance center. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 1100 -- 1109, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. MASSON et al., 2011 IESM2011Paper73 MASSON, R., LEHUÉDÉ, F., and PÉTON, O. (2011). A route feasibility algorithm for the dial a ride problem with transfers. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 1224 -- 1232, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. MELLER and ELLIS, 2011 IESM2011Paper177 MELLER, R. and ELLIS, K. (2011). An investigation into the physical internet: establishing the logistics system gain potential. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 575 -- 584, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. MESKENS et al., 2011 IESM2011Paper198 MESKENS, N., DUVIVIER, D., HANSET, A., and GOSSART, D. (2011). Multi-objective constraint programming for scheduling operating theatres. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 1486 -- 1495, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. MICHALLET et al., 2011 IESM2011Paper174 MICHALLET, J., PRINS, C., AMODEO, L., YALAOUI, F., and VITRY, G. (2011). Vehicle routing problem with overlap constraints. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 1311 -- 1320, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. MICHEL et al., 2011 IESM2011Paper123 MICHEL, P.-A., MARANZANA, N., DUBOIS, P., LESAGE, F., and SEIGNARD, D. (2011). Introduction of an eco-design process within an SME to design product ranges. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 437 -- 447, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. MOEINI and LE-THI, 2011 IESM2011Paper10 MOEINI, M. and LE-THI, H. A. (2011). A DC programming approach for the constrained two-dimensional non-guillotine cutting problem. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 212 -- 221, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. MOGAADI and CHAAR, 2011 IESM2011Paper140 MOGAADI, H. and CHAAR, B. F. (2011). Robust genetic algorithm for RCPSP with uncertain activities processing time. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 290 -- 298, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. MOHAMMADI et al., 2011 IESM2011Paper51 MOHAMMADI, M., TAVAKKOLI-MOGHADDAM, R., GHODRATNAMA, A., and ROSTAMI, H. (2011). Solving a capacitated single-allocation hub covering location problem by a genetic algorithm. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 776 -- 783, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. MOLINA-PARIENTE et al., 2011 IESM2011Paper205 MOLINA-PARIENTE, J. M., FRAMINAN, J. M., and PEREZ-GONZALEZ, P. (2011). New heuristics for the operating room planning problem. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 1476 -- 1485, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. MORTADA and YACOUT, 2011 IESM2011Paper88 MORTADA, M.-A. and YACOUT, S. (2011). The use of logical analysis of data in conjunction with expert elicitation in condition based maintenance. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 939 -- 945, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. MOSBAH and DAO, 2011 IESM2011Paper27 MOSBAH, A. B. and DAO, T.-M. (2011). Optimization of manufacturing cell formation with extended great deluge approach. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 380 -- 386, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. MUNGA et al., 2011 IESM2011Paper179 MUNGA, J. N., DAUZÈRE-PÉRÈS, S., YUGMA, C., and VIALLETELLE, P. (2011). A mathematical programming approach for determining control plans in semiconductor manufacturing. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 615 -- 623, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. NAIT-SIDI-MOH et al., 2011 IESM2011Paper195 NAIT-SIDI-MOH, A., BENJELLOUN, M., GABER, J., and WACK, M. (2011). A model-driven approach for the management of workflow patterns. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 487 -- 496, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. NECHVAL et al., 2011 IESM2011Paper136 NECHVAL, N. A., NECHVAL, K. N., PURGAILIS, M., DANOVICH, V., and LIEPINS, T. (2011). Statistical prediction for maintenance and reliability based on life data from extreme value distributions. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 1050 -- 1059, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. NGUYEN et al., 2011 IESM2011Paper144 NGUYEN, V.-P., PRINS, C., and PRODHON, C. (2011). A hybrid metaheuristic for the two-echelon location routing problem. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 1195 -- 1204, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. NIELSEN and ERIKSEN, 2011 IESM2011Paper111 NIELSEN, P. and ERIKSEN, T. (2011). Towards an analysis methodology for identifying root causes of poor delivery performance. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 754 -- 764, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. NIU and DINH, 2011 IESM2011Paper130 NIU, Y.-S. and DINH, T. P. (2011). A DC programming approach for mixed integer convex quadratic programs. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 222 -- 231, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. OLSON et al., 2011 IESM2011Paper219 OLSON, E., OKUDAN, G. E., CHIU, M.-C., and HAAPALA, K. R. (2011). Positioning product arhitecture as the driver for carbon footprint \& efficiency trade-offs in a global supply chain. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 917 -- 925, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. PACKIANATHER et al., 2011 IESM2011Paper224 PACKIANATHER, M. S., RAMIREZ, F. J., LEE, J. Y., and PHAM, D. T. (2011). Optimisation of deep drawing process time and cost using the bees algorithm. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 281 -- 289, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. PEREZ-GONZALEZ et al., 2011 IESM2011Paper207 PEREZ-GONZALEZ, P., FRAMINAN, J. M., and MOLINA-PARIENTE, J. M. (2011). Due date setting in permutation flowshop with arrival of new jobs. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 361 -- 370, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. PERRY et al., 2011 IESM2011Paper2 PERRY, N., KROMM, F.-X., POMPIDOU, S., and MANTAUX, O. (2011). Research orientations in design for recovery applied to composite parts. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 458 -- 466, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. PHAM et al., 2011 IESM2011Paper223 PHAM, D. T., CASTELLANI, M., and LE-THI, H. A. (2011). Intelligent Optimisation. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 5 -- 10, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. PHILLIPOT and CARRÉ-MÉNÉTRIER, 2011 IESM2011Paper176 PHILLIPOT, A. and CARRÉ-MÉNÉTRIER, V. (2011). Comparison of diagnosis approaches for discrete event systems. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 1131 -- 1140, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. PINEL et al., 2011 IESM2011Paper152 PINEL, M., GZARA, L., PRALUS, M., BRAESCH, C., BIGEON, J., and TABOUROT, L. (2011). PLM and lean: two complementary pillars for the company. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 565 -- 574, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. PLINKE et al., 2011 IESM2011Paper48 PLINKE, F., BRAASCH, A., ALTHAUS, D., and MEYNA, A. (2011). Estimation of non-linear tolerance chains with the monte-carlo-method illustrated by an example from circuit boards. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 1008 -- 1019, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. RAA and BONTE, 2011 IESM2011Paper91 RAA, B. and BONTE, W. (2011). Fleet optimization for cyclic inventory routing. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 1261 -- 1270, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. RADHOUI et al., 2011 IESM2011Paper171 RADHOUI, M., MHEDHBI, W., CHELBI, A., and REZG, N. (2011). An integrated production/quality/maintenance strategy for an unreliable production system: case of perishable products. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 1040 -- 1049, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. REBAI et al., 2011 IESM2011Paper190 REBAI, M., KACEM, I., and ADJALLAH, K. H. (2011). Branch and bound for scheduling jobs on parallel machines under maintenance constraints. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 784 -- 789, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. RIBAS et al., 2011 IESM2011Paper64 RIBAS, S., SUBRAMANIAN, A., COELHO, I. M., OCHI, L. S., and SOUZA, M. J. F. (2011). A hybrid algorithm for the vehicle routing problem with time windows. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 1243 -- 1252, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. RODRIGUEZ-VERJAN et al., 2011 IESM2011Paper181 RODRIGUEZ-VERJAN, C., AUGUSTO, V., XIE, X., and BUTHION, V. (2011). A simulation model for evaluation of the impacts of chemotherapy at home on hospitals. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 1524 -- 1533, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. ROSSI et al., 2011 IESM2011Paper170 ROSSI, M., KERGA, E. T., TAISCH, M., and TERZI, S. (2011). Lean product development: fact finding research in Italy. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 556 -- 564, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. RUBASZEWSKI et al., 2011 IESM2011Paper113 RUBASZEWSKI, J., YALAOUI, A., AMODEO, L., YALAOUI, N., and MAHDI, H. (2011). A capacitated lot-sizing problem with limited number of changes. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 76 -- 86, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. SAIDANI et al., 2011 IESM2011Paper153 SAIDANI, N., CHEN, H., and CHU, F. (2011). Incorporation of competitors' reactions in discrete competitive facility location and design. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 126 -- 133, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. SAIKOUK et al., 2011 IESM2011Paper61 SAIKOUK, T., ZOUAGHI, I., and SPALANZANI, A. (2011). RFID as a supply chain system regulator. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 1423 -- 1432, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. SALLEZ et al., 2011 IESM2011Paper167 SALLEZ, Y., BERGER, T., SENECHAL, O., BRANGER, G., and TRENTESAUX, D. (2011). Augmentation concept for the embedded diagnosis of complex systems. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 1444 -- 1453, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. SCHICK et al., 2011 IESM2011Paper184 SCHICK, M., GÜNNEL, B., HAUEIS, M., MEYNA, A., and BETZ, V. (2011). Raising the reliability of manual assembly through predicting human reliability. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 1120 -- 1130, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. SCHOLZ-REITER et al., 2011 IESM2011Paper104 SCHOLZ-REITER, B., TOONEN, C., and LAPPE, D. (2011). Investigation of the influence of machine-driven capacity constellations on the performance of job-shop-systems. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 32 -- 39, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. SELSOULI et al., 2011 IESM2011Paper149 SELSOULI, M. A., NAJID, N., and MOHAFID, A. (2011). Dantzig-wolfe decomposition based heuristic for an integrated production and maintenance planning problem. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 978 -- 987, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. SHAH et al., 2011 IESM2011Paper74 SHAH, L., ETIENNE, A., SIADAT, A., and VERNADAT, F. (2011). Value/risk based performance evaluation of integrated product and process design. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 13 -- 22, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. SHIRI et al., 2011 IESM2011Paper53 SHIRI, S., TAVAKKOLI-MOGHADDAM, R., and TASLIMI, M. (2011). Solving the reliable fixed-charge location model by NSGA-II. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 790 -- 798, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. SIDIBE and ADJALLAH, 2011 IESM2011Paper212 SIDIBE, I. D. B. and ADJALLAH, K. H. (2011). Failure predicting for the failure process modelling of an equipment in operation. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 1174 -- 1182, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. SILES et al., 2011 IESM2011Paper218 SILES, C., BAPTISTE, P., and MASCLE, C. (2011). Decision support in the management of end-of-life aircraft. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 1080 -- 1088, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. SINGH and BENYOUCEF, 2011 IESM2011Paper214 SINGH, R. K. and BENYOUCEF, L. (2011). Fuzzy TOPSIS based methodology for supply chain coordination problems. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 848 -- 858, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. SUBRAMANIAN et al., 2011 IESM2011Paper40 SUBRAMANIAN, A., PENNA, P. H. V., UCHOA, E., and OCHI, L. S. (2011). A hybrid algorithm for the fleet size and mix vehicle routing problem. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 1214 -- 1223, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. SUN et al., 2011 IESM2011Paper108 SUN, H., HOUSSIN, R., and GARDONI, M. (2011). Improving product performance with integration of using tasks during the design phase: a behavioural design approach. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 418 -- 426, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. TA et al., 2011 IESM2011Paper165 TA, A. S., LE-THI, H. A., and DINH, T. P. (2011). Solving power control problems in wireless networks via DCA. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 204 -- 211, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. TAVAKKOLI-MOGHADDAM et al., 2011 IESM2011Paper57 TAVAKKOLI-MOGHADDAM, R., TAHERI, F., and BAZZAZI, M. (2011). Solving for a quay crane scheduling and assignment problem by simulated annealing. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 326 -- 333, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. THOMAS et al., 2011 IESM2011Paper147 THOMAS, P., THOMAS, A., and BELMOKHTAR, S. (2011). Petri net control of a kanban loop. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 605 -- 614, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. TORKAMANI et al., 2011 IESM2011Paper122 TORKAMANI, A., HADJ-HAMOU, K., and BIGEON, J. (2011). An improved particle swarm optimization for solving constrained engineering design problems. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 194 -- 203, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. TRABELSI et al., 2011 IESM2011Paper107 TRABELSI, W., SAUVEY, C., and SAUER, N. (2011). Mathematical model and lower bound for flowshop problem with mixed blocking constraints. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 103 -- 112, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. TRAN and LE-THI, 2011 IESM2011Paper83 TRAN, D. Q. and LE-THI, H. A. (2011). A fast and scalable algorithm for a multi-stage manufacturing problem. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 259 -- 268, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. ULDRY et al., 2011 IESM2011Paper16 ULDRY, M., WIDMER, M., and HERTZ, A. (2011). Two objective functions for a real life split delivery vehicle routing problem. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 1290 -- 1299, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. VERCRAENE and GAYON, 2011 IESM2011Paper8 VERCRAENE, S. and GAYON, J.-P. (2011). A two-stage production/inventory system with admission control of product returns. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 537 -- 546, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. VILLEGAS et al., 2011 IESM2011Paper28 VILLEGAS, J. G., PRINS, C., PRODHON, C., MEDAGLIA, A. L., and VELASCO, N. (2011). Heuristic column generation for the truck and trailer routing problem. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 1205 -- 1213, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. VILLENEUVE et al., 2011 IESM2011Paper194 VILLENEUVE, E., BELER, C., PERES, F., and GENESTE, L. (2011). Hybridization of bayesian networks and belief functions to assess risk. application to aircraft disassembly. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 1070 -- 1079, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. WANG et al., 2011 IESM2011Paper47 WANG, D., GRUNDER, O., and MOUDNI, A. E. (2011). Production scheduling problems with stage-dependent inventory and delivery considerations. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 344 -- 349, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. WONG et al., 2011 IESM2011Paper225 WONG, L.-P., LOW, M. Y. H., and CHONG, C. S. (2011). Solving job shop scheduling problems with a generic bee colony optimization framework. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 269 -- 280, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. YALAOUI et al., 2011 IESM2011Paper110 YALAOUI, F., LARA, A. F. B., AMODEO, L., and DUGARDIN, F. (2011). Approximate solution methods for the parallel machine scheduling problem with total tardiness minimization. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 334 -- 343, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. YEDES et al., 2011 IESM2011Paper211 YEDES, Y., REZG, N., and CHELBI, A. (2011). Quasi-optimal single-vendor single-buyer strategies with imperfect production process. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 877 -- 888, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. ZAERPOUR et al., 2011 IESM2011Paper20 ZAERPOUR, N., YU, Y., and KOSTER, R. B. D. (2011). Optimizing layout of a very high density storage system. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 242 -- 247, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. ZAMBRANO et al., 2011 IESM2011Paper118 ZAMBRANO, G., PACH, C., ADAM, E., BERGER, T., and TRENTESAUX, D. (2011). Myopic behavior in heterarchical control of FMS. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 1352 -- 1362, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. ZHANG et al., 2011 IESM2011Paper103 ZHANG, T., MARCON, E., and MASCOLO, M. D. (2011). Comparison of chemotherapy at home systems using discrete-event simulation. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 1534 -- 1541, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. ZHAO and CHEN, 2011 IESM2011Paper155 ZHAO, W. and CHEN, H. (2011). Column generation algorithm for mobile sensor routing in event capture. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 1280 -- 1289, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. ZHONG and AGHEZZAF, 2011 IESM2011Paper67 ZHONG, Y. and AGHEZZAF, E.-H. (2011). An iterated local search algorithm for the single-vehicle cyclic inventory routing problem. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 765 -- 775, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. ZOUAGHI et al., 2011 IESM2011Paper52 ZOUAGHI, I., SPALANZANI, A., and GUNASEKARAN, A. (2011). Identify information sharing antecedents in supply chain relational dynamics. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 859 -- 866, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4. ZOUGGARI and BENYOUCEF, 2011 IESM2011Paper200 ZOUGGARI, A. and BENYOUCEF, L. (2011). Supplier selection with order allocation using a simluation-based fuzzy approach. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IESM'2011), pages 908 -- 916, Metz, France. École nationale d'ingénieurs de Metz (ENIM), International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-3-4.