Agi, 2015 IESM2015Paper163 Agi, M. (2015). Analysis of The Influence of Organisational and Inter-Organisational Factors on the Implementation of Green Supply Chain Management Practices. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 803 -- 812, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Ahmed and Kilic, 2015 IESM2015Paper105 Ahmed, F. and Kilic, K. (2015). Modification to Fuzzy Extent Analysis Method and its Performance Analysis. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 435 -- 438, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Aiane et al., 2015 IESM2015Paper215 Aiane, D., El-Amraoui, A., and Mesghouni, K. (2015). A new optimization approach for a home health care problem. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 285 -- 290, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Ait-El-Cadi et al., 2015a IESM2015Paper227 Ait-El-Cadi, A., Atitallah, R. B., Mladenović, N., and Artiba, A. (2015a). A Variable Neighborhood Search (VNS) metaheuristic for Multiprocessor Scheduling Problem with Communication Delays. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 1091 -- 1095, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Ait-El-Cadi et al., 2015b IESM2015Paper160 Ait-El-Cadi, A., Benmansour, R., Serraj, F., and Artiba, A. (2015b). A joint optimization-simulation model to minimize the makespan on a repairable machine. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 489 -- 495, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Ait-El-Cadi et al., 2015c IESM2015Paper266 Ait-El-Cadi, A., Hachemi, N. E., Artiba, A., and Jamali, M. A. (2015c). Generalizing of the integration of noncyclical preventive maintenance scheduling and production planning for a series-parallel production line. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 216 -- 219, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Akram and Pilbeam, 2015 IESM2015Paper222 Akram, M. and Pilbeam, C. (2015). Critical Success Factors for Effective Risk Management in New product Development. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 1205 -- 1212, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Alhuraish et al., 2015 IESM2015Paper175 Alhuraish, I., Robledo, C., and Kobi, A. (2015). The Effective of Lean Manufacturing and Six Sigma Implementation. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 453 -- 460, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Allamano-Kessler et al., 2015 IESM2015Paper248 Allamano-Kessler, R., Morana, J., Gonzalez-Feliu, J., Allaoui, H., and Doyen, L. (2015). Stability around the Hyper-LSP in French distribution channel: a “Prey-Predator” modeling. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 584 -- 590, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Ammar et al., 2015 IESM2015Paper216 Ammar, A., Pierreval, H., and Elkosantini, S. (2015). A multiobjective simulation optimization approach to define teams of workers in stochastic production systems. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 977 -- 986, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Arantes et al., 2015 IESM2015Paper49 Arantes, A., da Silva, P. F., and Ferreira, L.-M. D. F. (2015). Delays in construction projects - Causes and impacts. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 1105 -- 1110, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Assellaou et al., 2015 IESM2015Paper7 Assellaou, H., Ouhbi, B., and Frikh, B. (2015). An ANP-PROMETHEE model for supplier selection and a case study. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 1137 -- 1145, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Awad, 2015 IESM2015Paper11 Awad, M. (2015). Reliability Growth Test Planning of Repairable Systems Using Subsystem Failure Distribution Data. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 155 -- 160, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Azimi et al., 2015 IESM2015Paper106 Azimi, Z. N., Salari, M., Renaud, J., and Ruiz, A. (2015). Operating a biomedical samples laboratories network under stochastic demand. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 619 -- 624, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Bahroun and Harbi, 2015 IESM2015Paper35 Bahroun, M. and Harbi, S. (2015). Risk management in the modern retail supply chain: Lessons from a case study and literature review. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 1161 -- 1170, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Baptiste et al., 2015 IESM2015Paper238 Baptiste, P., Rebaine, D., and Zouba, M. (2015). Solving the two identical parallel machine problem with a single operator. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 502 -- 507, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Barbosa and Azevedo, 2015 IESM2015Paper65 Barbosa, C. and Azevedo, A. (2015). Operations Strategy Frameworks in Manufacturing, Services and Product-Service Systems. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 1111 -- 1120, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Barros et al., 2015 IESM2015Paper103 Barros, M., Possamai, O., Valentina, L. D., and Oliveira, M. (2015). Analysis of time to market complexity:a case study of application of Bayesian networks as a forecasting tool. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 1197 -- 1204, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Belisário et al., 2015 IESM2015Paper217 Belisário, L. S., Azouz, N., and Pierreval, H. (2015). Adaptive ConWIP: analyzing the impact of changing the number of cards. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 930 -- 937, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Ben-Alaia et al., 2015 IESM2015Paper132 Ben-Alaia, E., Harbaoui-Dridi, I., Bouchriha, H., and Borne, P. (2015). Insertion of new depot locations for the optimization of multi-vehicles Multi-Depots Pickup and Delivery Problems using Genetic Algorithm. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 695 -- 701, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Ben-Mahmoud et al., 2015 IESM2015Paper122 Ben-Mahmoud, H., Ketata, R., Ben-Romdhane, T., and Ben-Ahmed, S. (2015). Comparative Study of Fuzzy Hierarchical Hybrid Approaches for Control of Quality Management System. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 1034 -- 1040, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Benbitour et al., 2015 IESM2015Paper240 Benbitour, M. H., Sahin, E., and Barbieri, A. (2015). A comparison of different cross-docking organizations in a JIT manufacturing system; application in the automotive industry. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 1390 -- 1412, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Benderbal et al., 2015 IESM2015Paper246 Benderbal, H. H., Dahane, M., and Benyoucef, L. (2015). A new Robustness index for machines selection in Reconfigurable Manufacturing System. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 1019 -- 1026, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Benkel et al., 2015 IESM2015Paper44 Benkel, K., Jornsten, K., and Leisten, R. (2015). Variability Aspects in Flowshop Scheduling Systems. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 118 -- 127, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Bereriche and Ait-Kadi, 2015 IESM2015Paper12 Bereriche, Y. and Ait-Kadi, D. (2015). Reliability Analysis of Supply Chain for Contingency Operations. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 509 -- 519, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Bertolini et al., 2015 IESM2015Paper113 Bertolini, M., Romagnoli, G., and Zammori, F. (2015). Simulation of two hybrid production planning and control systems: a comparative analysis. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 388 -- 397, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Bevilacqua et al., 2015 IESM2015Paper95 Bevilacqua, M., Ciarapica, F. E., de Sanctis, I., Mazzuto, G., and Paciarotti, C. (2015). The automation of an assembly system: a business process re-engineering (BPR) perspective. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 371 -- 377, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Bian et al., 2015 IESM2015Paper131 Bian, Y., Bostel, N., Lemoine, D., Yeung, T., Hovelaque, V., and Viviani, J.-L. (2015). Dynamic lot-sizing-based working capital requirement minimization model with infinite capacity. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 1048 -- 1054, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Bostel et al., 2015 IESM2015Paper208 Bostel, N., Dejax, P., and Zhang, M. (2015). A model and a metaheuristic method for the Hub Location Routing Problem and application to postal services. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 1383 -- 1389, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Bouargane and Cherkaoui, 2015 IESM2015Paper191 Bouargane, L. and Cherkaoui, A. (2015). Towards an explicative model of human cognitive process in a hidden hazardous situation and a cognitive ergonomics intervention in railway environment. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 968 -- 976, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Boudi et al., 2015 IESM2015Paper2 Boudi, Z., El-Koursi, E.-M., and Collart-Dutilleul, S. (2015). Colored Petri Nets formal transformation to B machines for safety critical software development. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 12 -- 18, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Bouh and Riopel, 2015 IESM2015Paper231 Bouh, M. A. and Riopel, D. (2015). Material handling equipment selection: new classifications of equipments and attributes. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 461 -- 468, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Boussellaa and Abed, 2015 IESM2015Paper33 Boussellaa, A. and Abed, M. (2015). Information System Design for Reverse logistics Management using UML. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 1230 -- 1239, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Bruno, 2015 IESM2015Paper94 Bruno, G. (2015). Measuring product semantic similarity by exploiting a manufacturing process ontology. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 1251 -- 1257, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Buiza-Camacho et al., 2015 IESM2015Paper42 Buiza-Camacho, G., del Mar Cerbán Jiménez, M., Cepolina, S., Djordjevic, O., Dobrijevic, A., and Gaya, C. G. (2015). Current situation of the Mediterranean container ports regarding the operational, energy and environment areas. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 530 -- 536, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Bustillo et al., 2015 IESM2015Paper34 Bustillo, M., Moreno, B. M., Pardo, E. G., and Duarte, A. (2015). An algorithm for batching, sequencing and picking operations in a warehouse. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 842 -- 849, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Campuzano-Bolarin et al., 2015 IESM2015Paper102 Campuzano-Bolarin, F., Mula, J., and Díaz-Madroñero, M. (2015). A supply chain dynamics model for managing perishable products under different e-business scenarios. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 329 -- 337, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Canca et al., 2015 IESM2015Paper180 Canca, D., Barrena, E., and de los Santos, A. (2015). On Setting Line Frequencies and Capacities in Dense Railway Rapid Transit Networks. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 670 -- 674, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Cannella et al., 2015 IESM2015Paper155 Cannella, S., Domínguez, R., Framinan, J. M., and Bruccoleri, M. (2015). Insights on partial information sharing in supply chain dynamics. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 344 -- 350, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Chabbah-Sekma et al., 2015 IESM2015Paper108 Chabbah-Sekma, N., Elleuch, A., and Dridi, N. (2015). Cross-correlation analyses toward a prediction system of CPU availability in volunteer computing system. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 184 -- 192, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Chen, 2015 IESM2015Paper117 Chen, L.-M. (2015). How Does a Responsible Supplier Control its Production under the Opportunity of Demand Expansion? In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 955 -- 962, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Chraibi et al., 2015 IESM2015Paper43 Chraibi, A., Saïd, K., Osman, I., and El-Beqqali, O. (2015). Optimization of Dynamic Operating Theatre Facility Layout. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 262 -- 271, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Cortes-Fibla et al., 2015 IESM2015Paper178 Cortes-Fibla, R., Vidal-Carreras, P. I., and Garcia-Sabater, J. P. (2015). Considering the effect of demand diversity on the performance of different production strategies for the economic lot scheduling problem. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 1303 -- 1309, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. da Costa Fontes and Goncalves, 2015 IESM2015Paper192 da Costa Fontes, F. F. and Goncalves, G. (2015). Routing Problem with Pendular and Cyclic Service in a Hierarchical Structure of Hub and Spoke with Multiple Allocation of Sub-Hubs. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 561 -- 567, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Dahbi et al., 2015 IESM2015Paper116 Dahbi, S., Ezzine, L., and Moussami, H. E. (2015). Multiple Regression Model for Surface Roughness Using Full Factorial Design. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 439 -- 444, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Daldoul et al., 2015 IESM2015Paper199 Daldoul, D., Nouaouri, I., Bouchriha, H., and Allaoui, H. (2015). Optimization on Human and Material Resources in Emergency Department. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 633 -- 638, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Daquin et al., 2015 IESM2015Paper195 Daquin, C., Goncalves, G., Allaoui, H., and Hsu, T. (2015). Neighborhood Strategies for the Truck Dock Assignment Problem in Cross-Docks. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 714 -- 723, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. del Mar Miras-Rodríguez et al., 2015 IESM2015Paper173 del Mar Miras-Rodríguez, M., Domínguez-Machuca, J. A., and Escobar-Pérez, B. (2015). Sustainability drivers, barriers and outcomes: Evidence from European High Performance Manufacturing companies. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 963 -- 967, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Dios and Framinan, 2015 IESM2015Paper170 Dios, M. and Framinan, J. M. (2015). Constructive Heuristics Comparison in Hybrid Flow Shop Scheduling Environments with Missing Operations. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 858 -- 868, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. do Carmo et al., 2015 IESM2015Paper230 do Carmo, B. B. T., Baptiste, P., and Margni, M. (2015). Method to support the biofuel supplier choice: a LCA approach. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 574 -- 583, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Domínguez et al., 2015 IESM2015Paper164 Domínguez, R., Cannella, S., and Framinan, J. M. (2015). On the Evaluation of Arborescent Supply Chains with Inventory Errors. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 708 -- 713, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Duhamel et al., 2015 IESM2015Paper37 Duhamel, C., Vincent, B., Tchernev, N., and Ren, L. (2015). Support Vector Machine and Monte Carlo Simulation for Robust Optimization of Industrial Processes. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 988 -- 997, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. El-Amraoui and Mesghouni, 2015 IESM2015Paper171 El-Amraoui, A. and Mesghouni, K. (2015). Performing Enhanced Rail Formal Engineering Constraints Traceability: Transition Modes. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 61 -- 66, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. El-Mokrini et al., 2015 IESM2015Paper236 El-Mokrini, A., Dafaoui, E.-M., El-Mhamedi, A., and Berrado, A. (2015). A Decision Framework for Outsourcing Logistics in the Pharmaceutical Supply Chain. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 748 -- 756, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Elhachfi-Essoussi, 2015 IESM2015Paper194 Elhachfi-Essoussi, I. (2015). A performance evaluation of some collaborative inventory management practices in the healthcare supply chain. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 277 -- 284, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Escobar-Falcón et al., 2015 IESM2015Paper188 Escobar-Falcón, L. M., Alvarez-Martinez, D., Escobar, J. W., Linfati, R., and Granada, M. (2015). A hybrid metaheuristic approach for the Capacitated Vehicle Routing Problem with Container Loading Constraints. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 1374 -- 1382, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Faivre et al., 2015 IESM2015Paper72 Faivre, A., Lapitre, A., Lanusse, A., Perin, M., Rangra, S., Sallak, M., and Schön, W. (2015). Two methods for modeling and verification of safety properties of railway infrastructures. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 48 -- 54, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Fakher et al., 2015 IESM2015Paper148 Fakher, H. B., Nourelfath, M., and Gendreau, M. (2015). Joint production-maintenance planning in an imperfect system with quality degradation. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 910 -- 919, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Fanjul et al., 2015 IESM2015Paper15 Fanjul, L., Perea, F., and Ruiz, R. (2015). Algorithms for the Unspecified Unrelated Parallel Machine Scheduling Problem with additional Resources. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 69 -- 73, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Fattah et al., 2015 IESM2015Paper162 Fattah, J., Ezzine, L., and Lachhab, A. (2015). Modeling of the Stock Management System Using Batch Deterministic and Stochastic Petri Nets (BDSPNs): Application for Performance Evaluation. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 446 -- 452, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Fenies et al., 2015 IESM2015Paper260 Fenies, P., Gautier, F., and Lebrument, N. (2015). An approach for the valorization of competitive intelligence practices in SME supply chains. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 591 -- 600, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Ferlin et al., 2015 IESM2015Paper20 Ferlin, A., Bon, P., Collart-Dutilleul, S., and Wiels, V. (2015). Parallel verification of temporal properties using dynamic analysis. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 29 -- 38, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Fernandez-Gutierrez et al., 2015 IESM2015Paper82 Fernandez-Gutierrez, F., Kennedy, J. I., Zhou, S.-M., Cooksey, R., Atkinson, M., and Brophy, S. (2015). Comparing feature selection methods for high-dimensional imbalanced data: identifying rheumatoid arthritis cohorts from routine data. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 236 -- 241, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Fernandez-Viagas and Framinan, 2015 IESM2015Paper168 Fernandez-Viagas, V. and Framinan, J. M. (2015). Boundary lines between Permutation Flowshop Problems and Single Machine Problems. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 899 -- 908, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Fontana et al., 2015 IESM2015Paper139 Fontana, A., Cinus, M., Sorlini, M., Alge, M., Canetta, L., and Maggi, A. (2015). An advisory tool for sustainability-driven maintenance. A real case in mould and die industry. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 1268 -- 1276, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Framinan et al., 2015 IESM2015Proceedings Framinan, J. M., Perez-Gonzalez, P., and Artiba, A., editors (2015). Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Gallab et al., 2015 IESM2015Paper6 Gallab, M., Bouloiz, H., Garbolino, E., and Tkiouat, M. (2015). Model for Developing a Database for Risk Analysis. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 833 -- 841, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Gara-Ali and Espinouse, 2015 IESM2015Paper150 Gara-Ali, A. and Espinouse, M.-L. (2015). A two-machine flow-shop scheduling with a deteriorating maintenance activity on the second machine. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 481 -- 488, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. García, 2015 IESM2015Paper71 García, A. (2015). Study of alternative operation strategies in railroad terminals using simulation. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 725 -- 732, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Genevois et al., 2015 IESM2015Paper74 Genevois, M. E., Celik, D., and Ulukan, Z. (2015). Analytic Network Process Approach for Automatic Teller Machines Deployment Problem. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 1171 -- 1178, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Ghanes et al., 2015 IESM2015Paper26 Ghanes, K., Jouini, O., Wargon, M., and Jemai, Z. (2015). Modeling and analysis of triage nurse ordering in emergency departments. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 228 -- 235, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Ghazi et al., 2015 IESM2015Paper187 Ghazi, N., Zambrano-Rey, G., Bekrar, A., Trentesaux, D., and Tadjine, M. (2015). A preliminary study on integrating operation flexibility within semi-heterarchical FMS control. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 1310 -- 1317, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Godichaud et al., 2015 IESM2015Paper156 Godichaud, M., Amodeo, L., and Hrouga, M. (2015). Metaheuristic based optimization for capacitated disassembly lot sizing problem with lost sales. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 1329 -- 1335, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. González-Sánchez et al., 2015 IESM2015Paper92 González-Sánchez, M. J., Martín-Encina, E., Buiza-Camacho, G., Hidalgo-Arjona, M., and Beltrán-Sanz, J. (2015). Implementation of an Operations Management System in eight Spanish SMEs. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 1296 -- 1302, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Gouiaa et al., 2015 IESM2015Paper172 Gouiaa, A., Dellagi, S., Achour, Z., and Erray, W. (2015). Joint Integrated Maintenance-Quality policy with reworking activity. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 1336 -- 1342, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Guinet and Faccincani, 2015 IESM2015Paper159 Guinet, A. and Faccincani, R. (2015). Hospital’s Vulnerability Assessment. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 249 -- 254, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Gungor and Evans, 2015 IESM2015Paper125 Gungor, E. and Evans, S. (2015). Adressing environmental and economic impacts of changeover operations through manufacturing strategies. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 781 -- 787, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Hafsa et al., 2015 IESM2015Paper85 Hafsa, W., Chebel-Morello, B., Varnier, C., Medjaher, K., and Zerhouni, N. (2015). Prognostics of Health Status of Multi-component Systems With Degradation Interactions. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 870 -- 875, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Hajej et al., 2015 IESM2015Paper88 Hajej, Z., Rezg, N., and Chelbi, A. (2015). Optimization of Power Generation and Maintenance for a Wind Turbine under Stochastic Climatic Conditions. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 161 -- 167, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Harbaoui-Dridi et al., 2015 IESM2015Paper73 Harbaoui-Dridi, I., Ben-Alaia, E., and Borne, P. (2015). Heuristic Approach for The Optimization of The Dynamic Multi-Vehicle Pickup and Delivery Problem with Time Windows. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 733 -- 739, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Hatami et al., 2015 IESM2015Paper268 Hatami, S., Ruiz, R., and Romano, C. A. (2015). Heuristics for a Distributed Parallel Machine Assembly Scheduling Problem with Eligibility Constraints. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 145 -- 153, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Hennequin and Restrepo, 2015 IESM2015Paper128 Hennequin, S. and Restrepo, L. M. R. (2015). A Fuzzy Hedging Point Policy for Sustainable Manufacturing System. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 1041 -- 1047, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Horla and Owczarkowski, 2015 IESM2015Paper60 Horla, D. and Owczarkowski, A. (2015). Robust LQR with actuator failure control strategies for 4DoF model of unmanned bicycle robot stabilised by inertial wheel. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 998 -- 1003, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Husniah and Supriatna, 2015 IESM2015Paper138 Husniah, H. and Supriatna, A. K. (2015). Optimal Number of Fishing Fleet with a Maintenance Contract for a Sustainable Fishery Industry with a Generalized Logistic Production Function. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 546 -- 554, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Jamshidi et al., 2015 IESM2015Paper242 Jamshidi, A., Rahimi, S. A., Ait-Kadi, D., and Ruiz, A. (2015). Dynamic risk modeling and assessing in maintenance outsourcing projects with FCM. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 209 -- 215, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Jardioui et al., 2015 IESM2015Paper104 Jardioui, M., Alami, S., and Okar, C. (2015). What are the critical success factors for the implementation of supply chain performance measurement system in SMEs. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 338 -- 343, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Jenoui and Abouabdellah, 2015 IESM2015Paper189 Jenoui, K. and Abouabdellah, A. (2015). Implementation of a decision support system heuristic for selecting suppliers in the hospital sector. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 625 -- 632, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Joubert et al., 2015 IESM2015Paper18 Joubert, E., Espinasse, M.-A., and Nakhla, M. (2015). Patients flow optimization in ED: an operational research on the impacts of physician triage. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 602 -- 608, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Kadri et al., 2015a IESM2015Paper39 Kadri, F., Chaabane, S., Tahon, C., and Bekrar, A. (2015a). Resilience-Based Performance Assessment of Strain Situations in Emergency Departments. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 609 -- 618, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Kadri et al., 2015b IESM2015Paper25 Kadri, F., Harrou, F., Sun, Y., Chaabane, S., and Tahon, C. (2015b). Early Detection of Abnormal Patient Arrivals at Hospital Emergency Department. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 221 -- 227, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Katragjini et al., 2015 IESM2015Paper24 Katragjini, K., Vallada, E., and Ruiz, R. (2015). Rescheduling flowshops under simultaneous disruptions. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 84 -- 91, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Kemmoé-Tchomté et al., 2015 IESM2015Paper245 Kemmoé-Tchomté, S., Lamy, D., and Tchernev, N. (2015). A Metaheuristic based on Simulation for Stochastic Job-Shop Optimization. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 108 -- 116, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Kristjanpoller et al., 2015 IESM2015Paper140 Kristjanpoller, F., López-Campos, M. A., Viveros, P., and Crespo, A. (2015). Reliability assessment based on energy consumption as a failure rate factor. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 193 -- 202, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Kumar et al., 2015 IESM2015Paper123 Kumar, K., Clavijo-Lopez, C. J., Tellez-Sanchez, O. A., Gupta, A., Peton, O., Yeung, T., and Vanuxem, A. (2015). Integrated strategic and tactical optimization of animal-waste sourced biopower supply chains. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 1367 -- 1373, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Laaziz, 2015 IESM2015Paper244 Laaziz, E. H. (2015). A comparison of intermodal transportation service network design models. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 757 -- 762, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Labbi et al., 2015 IESM2015Paper63 Labbi, O., Ouzizi, L., and Douimi, M. (2015). A dynamic model for the redesign of a product and its upstream supply chain integrating PLM (Product Lifecycle Management) approach. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 1187 -- 1196, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Ladier and Alpan, 2015 IESM2015Paper87 Ladier, A.-L. and Alpan, G. (2015). Integrating truck scheduling and employee rostering in a cross-docking platform - an iterative approach. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 676 -- 685, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Lakri and Jemai, 2015 IESM2015Paper177 Lakri, S. and Jemai, Z. (2015). Performance Measurement and Management Systems of Supply chains: A review of the challenges they raise. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 920 -- 929, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Lalami et al., 2015 IESM2015Paper200 Lalami, I., Frein, Y., and Gayon, J.-P. (2015). A model for master production scheduling in automotive powertrain plants: a case study. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 1081 -- 1090, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Leitão and Pereira, 2015 IESM2015Paper158 Leitão, J. and Pereira, D. (2015). Absorptive Capacity, Coopetition and Product Innovation: A comparative analysis between Italian and Portuguese Service Firms. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 1121 -- 1135, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Li et al., 2015 IESM2015Paper134 Li, F., Etienne, A., Vernadat, F., and Siadat, A. (2015). BCVR: A Methodological Framework for Industrial Performance Management and Decision-Support. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 1258 -- 1267, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Li and Disney, 2015 IESM2015Paper78 Li, Q. and Disney, S. (2015). On Net Stock Amplification in the Damped Trend Order-Up-To System. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 322 -- 328, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Liu et al., 2015 IESM2015Paper204 Liu, Q., Tchangani, A., Kamsu, B., and Pérès, F. (2015). Modelling a large scale system for risk assessment. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 203 -- 208, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Ma et al., 2015 IESM2015Paper67 Ma, S., Jemai, Z., Sahin, E., and Dallery, Y. (2015). Assortment decision in the Multi-Product News-Vendor Problem with Demand Substitution. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 304 -- 311, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Makarova et al., 2015 IESM2015Paper22 Makarova, I., Khabibullin, R., Belyaev, E., Mavrin, V., and Verkin, E. (2015). Creating a Safe Working Environment Via Analyzing the Ergonomic Parameters of Workplaces on an Assembly Conveyor. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 947 -- 954, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Mallor et al., 2015 IESM2015Paper193 Mallor, F., Azcárate, C., Barado, J., and Esparza, L. (2015). Optimal bed-control in an ICU when elective patient’s arrivals are known. A simulation-based optimization approach. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 255 -- 260, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Manotas-NiÑo et al., 2015 IESM2015Paper76 Manotas-NiÑo, V., Clermont, P., Geneste, L., and Halabi, A. X. (2015). Towards a Model of Integration between Risk Management and Lesson Learned for Project Management. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 1179 -- 1185, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Masmoudi and Benbrahim, 2015 IESM2015Paper142 Masmoudi, A. A. and Benbrahim, M. (2015). New heuristics to minimize makespan for two identical parallel machines with one constraint of unavailability on each machine. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 476 -- 480, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Masmoudi et al., 2015 IESM2015Paper252 Masmoudi, O., Yalaoui, A., Ouazene, Y., and Chehade, H. (2015). A multi-level capacitated lot-sizing problem with energy consideration. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 1352 -- 1359, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Miclo et al., 2015 IESM2015Paper190 Miclo, R., Fontanili, F., Lauras, M., Jacques, L., and Milian, B. (2015). MRP vs. Demand-Driven MRP: Towards an Objective Comparison. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 1072 -- 1080, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Moncayo-Martinez, 2015 IESM2015Paper255 Moncayo-Martinez, L. A. (2015). A Multi--objective approach based on Rank Ant System to Configure Logistics Networks. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 763 -- 769, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Montmain et al., 2015 IESM2015Paper50 Montmain, J., Berrah, L., Clivillé, V., Foulloy, L., and Mauris, G. (2015). How to handle the Decision-Maker’s awareness of industrial context in his objectives declaration? In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 417 -- 425, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Moreno et al., 2015 IESM2015Paper28 Moreno, P., Adenso-Diaz, B., Lozano, S., and Garcia, S. (2015). Influence of the environmental impact of logistics operations on the centralization strategy. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 556 -- 560, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Mota et al., 2015 IESM2015Paper124 Mota, B., Carvalho, A., Gomes, I., and Barbosa-Póvoa, A. P. (2015). Green supply chain design and planning. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 537 -- 545, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Mouassa and Bouktir, 2015 IESM2015Paper157 Mouassa, S. and Bouktir, T. (2015). Artificial Bee Colony Algorithm for Discrete Optimal Reactive Power Dispatch. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 654 -- 662, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Muriana et al., 2015 IESM2015Paper68 Muriana, C., Gilia, G., Mistretta, V., Piazza, T., and Vizzini, G. (2015). Improving interoperability of clinical documents: a case study of LOINC mapping in analysis laboratories. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 1240 -- 1244, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Nahas and Nourelfath, 2015 IESM2015Paper114 Nahas, N. and Nourelfath, M. (2015). Buffer allocation, machine selection and preventive maintenance optimization in unreliable production lines. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 1028 -- 1033, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Nattaf et al., 2015 IESM2015Paper152 Nattaf, M., Artigues, C., Lopez, P., Medina, R., Parada, V., and Pradenas, L. (2015). A batch sizing and scheduling problem on parallel machines with different speeds, maintenance operations, setup times and energy costs. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 883 -- 891, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Ndhaief et al., 2015 IESM2015Paper213 Ndhaief, N., Bistorin, O., and Rezg, N. (2015). Problem Analysis of Logistic Platform based on Combined Forward and Reverse Flows: a Case Study. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 568 -- 573, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Olga et al., 2015 IESM2015Paper137 Olga, B., Xavier, D., Alexandre, D., Brigitte, F., and Frédéric, G. (2015). Flow Line Balancing Problem: a survey. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 1065 -- 1071, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Pacheco et al., 2015 IESM2015Paper185 Pacheco, E., Lüders, R., and Barbosa-Póvoa, A. P. (2015). Performance Metrics for a Supply Chain Subject to Stochastic Demand. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 823 -- 831, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Pellegrini et al., 2015 IESM2015Paper79 Pellegrini, P., Marlière, G., and Rodriguez, J. (2015). Real-time railway traffic management optimization and imperfect information: preliminary studies. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 55 -- 60, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Peng et al., 2015 IESM2015Paper46 Peng, J., Jouini, O., Jemai, Z., and Dallery, Y. (2015). Service Capacity Pooling in M/G/1 Service Systems. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 1097 -- 1104, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Pimentel and Martins, 2015 IESM2015Paper184 Pimentel, C. and Martins, S. (2015). Design and Implementation of a Manufacturing Cell in a Job Shop Environment: An Action Research Study. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 398 -- 407, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Pires et al., 2015 IESM2015Paper86 Pires, A., Putnik, G., and Ávila, P. (2015). Value Analysis approach in the resources pre-selection of agile/virtual enterprises: domain of applicability and selection time. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 1245 -- 1250, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Pirlot et al., 2015 IESM2015Paper27 Pirlot, S., Lepage, F., Gnaedinger, E., and Kopp, R. (2015). IP/MPLS network modeling using Bayesian networks to improve double failure recovery. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 1155 -- 1160, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Pulido-Rojano et al., 2015 IESM2015Paper81 Pulido-Rojano, A., García-Díaz, J. C., and Giner-Bosch, V. (2015). A multiobjective approach for optimization of the multihead weighing process. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 426 -- 434, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Qaeze et al., 2015 IESM2015Paper143 Qaeze, F., Thierry, C., and Romain, G. (2015). Local and global optimization in raw material processing. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 1055 -- 1063, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Qazi et al., 2015a IESM2015Paper84 Qazi, A., Quigley, J., Dickson, A., Gaudenzi, B., and Şule Önsel Ekici (2015a). Cost and Benefit Analysis of Supplier Risk Mitigation in an Aerospace Supply Chain. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 850 -- 857, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Qazi et al., 2015b IESM2015Paper13 Qazi, A., Quigley, J., Dickson, A., Gaudenzi, B., and Şule Önsel Ekici (2015b). Evaluation of Control Strategies for Managing Supply Chain Risks using Bayesian Belief Networks. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 1146 -- 1154, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Qazi et al., 2015c IESM2015Paper256 Qazi, A., Quigley, J., Dickson, A., and Kirytopoulos, K. (2015c). Modelling Project Complexity driven Risk Paths in New Product Development. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 938 -- 945, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Rahimi et al., 2015 IESM2015Paper223 Rahimi, S. A., Jamshidi, A., Ait-Kadi, D., and Ruiz, A. (2015). Risk-based decision making framework for prioritizing patients’ access to healthcare services by considering uncertainties. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 291 -- 297, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Rahmouni and Hennet, 2015 IESM2015Paper38 Rahmouni, M. and Hennet, J.-C. (2015). Determining the optimal routes in the multi-product multi-site joint delivery problem. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 1361 -- 1366, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Ramon and Ribas, 2015 IESM2015Paper31 Ramon, C. and Ribas, I. (2015). Efficient Constructive procedures for the distributed blocking flowshop scheduling problem. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 92 -- 98, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Rizzon et al., 2015 IESM2015Paper32 Rizzon, B., Clivillé, V., Galichet, S., Ochalek, P., and Ratajczak, E. (2015). Decision Problem of Instrumentation in a Company involved in ISO 50001. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 409 -- 416, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Rohmer and Billaut, 2015 IESM2015Paper99 Rohmer, S. and Billaut, J.-C. (2015). Production and outbound distribution scheduling: a two-agent approach. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 135 -- 144, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Rosado and Relvas, 2015 IESM2015Paper126 Rosado, J. O. and Relvas, S. (2015). Integral Supply Chain Performance Management System Design and Implementation. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 788 -- 802, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Rotoli et al., 2015 IESM2015Paper30 Rotoli, F., Cawood, E. N., and Vannacci, L. (2015). Enclosing rail capacity/punctuality in accessibility measures: a two-step approach by using Data Envelopment Analysis and Analytic Hierarchy Process. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 39 -- 47, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Ruiz and Pan, 2015 IESM2015Paper17 Ruiz, R. and Pan, Q.-K. (2015). Simple greedy methods for scheduling hybrid flowshops with due date windows. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 74 -- 83, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Sanchís-Pedregosa et al., 2015 IESM2015Paper36 Sanchís-Pedregosa, C., del Mar González-Zamora, M., and Machuca, J. A. D. (2015). Determinants of the outcomes of services outsourcing: an empirical study of transport services. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 1278 -- 1285, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Santos et al., 2015 IESM2015Paper176 Santos, H., Benito, J. G., and Lannelongue, G. (2015). Supply Chain Management and Performance: a Bibliometric Analysis. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 813 -- 822, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Scano et al., 2015 IESM2015Paper166 Scano, G., Huguet, M.-J., and Ngueveu, S. U. (2015). Adaptations of k-Shortest Path Algorithms for Transportation Networks. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 663 -- 669, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Schoonenberg et al., 2015 IESM2015Paper69 Schoonenberg, W., Hols, J., and Diabat, A. (2015). A Cost Based Approach for a Crane Assignment and Scheduling Problem. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 647 -- 653, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Serrou and Abouabdellah, 2015 IESM2015Paper257 Serrou, D. and Abouabdellah, A. (2015). Study pharmacies grouping impact on the performance of the hospital supply chain. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 639 -- 645, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Souza-Martins et al., 2015 IESM2015Paper75 Souza-Martins, A. F., Costa-Affonso, R., Tamayo, S., Lamouri, S., and Ngayo, C. B. (2015). Relationships between national culture and Lean Management: a literature Review. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 352 -- 361, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Stefanelli et al., 2015 IESM2015Paper96 Stefanelli, F., Bevilacqua, M., and de Sanctis, I. (2015). Adaptability into Supply Chain Strategy: the adaptable PCSA framework. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 378 -- 387, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Sun et al., 2015 IESM2015Paper16 Sun, P., Bon, P., and Collart-Dutilleul, S. (2015). Model transformation from coloured Petri nets with prioritized transitions to B machines. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 19 -- 28, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Ta et al., 2015 IESM2015Paper98 Ta, Q. C., Billaut, J.-C., and Bouquard, J.-L. (2015). Heuristic algorithms to minimize the total tardiness in a flow shop production and outbound distribution scheduling problem. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 128 -- 134, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Tajri and Cherkaoui, 2015 IESM2015Paper70 Tajri, I. and Cherkaoui, A. (2015). Modeling the complexity of the relationship (Lean, Company, Employee and Cognitive Ergonomics) Case of Moroccan SMEs. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 1286 -- 1295, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Thomas et al., 2015 IESM2015Paper112 Thomas, P., Suhner, M.-C., and Thomas, A. (2015). Reduced simulation model for flow analysis in a sawmill internal supply chain. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 1319 -- 1328, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Tlili et al., 2015 IESM2015Paper165 Tlili, L., Radhoui, M., and Chelbi, A. (2015). Availability optimization of periodically inspected production systems generating environmental damage. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 892 -- 898, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Tonneau et al., 2015 IESM2015Paper146 Tonneau, Q., Bostel, N., Dejax, P., Hospital, R., Mülhaupt, V., and Yeung, T. (2015). Multimodal multi-flow problem with transformation : application to waste supply chain. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 876 -- 882, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Tsai and Wu, 2015 IESM2015Paper228 Tsai, Y. and Wu, S.-W. (2015). New concept of nurse education for service innovation-A perspective of internal marketing. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 298 -- 302, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Turki and Rezg, 2015 IESM2015Paper251 Turki, S. and Rezg, N. (2015). Performance Evaluation of a Closed Loop Manufacturing System Taking Into Account Delivery Activity and Degradation. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 469 -- 474, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Vicente et al., 2015 IESM2015Paper9 Vicente, J. J., Relvas, S., and Barbosa-Póvoa, A. P. (2015). Bullwhip effect metrics for multi-echelon systems under order batching policies with cyclic demand. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 771 -- 780, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Victoria et al., 2015 IESM2015Paper129 Victoria, J., Afsar, H. M., and Prins, C. (2015). Vehicle Routing Problem with Time-Dependent Demand in Humanitarian Logistics. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 686 -- 694, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Vidal-Carreras et al., 2015 IESM2015Paper127 Vidal-Carreras, P. I., García-Sabater, J. J., Marin-Garcia, J. A., and Garcia-Sabater, J. P. (2015). Value Stream Mapping on Healthcare. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 272 -- 276, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. von der Linde and Moench, 2015 IESM2015Paper210 von der Linde, R. and Moench, L. (2015). A Sampling Approach to Solve the Vehicle Routing Problem with Time Windows and Stochastic Travel Times. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 740 -- 747, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Wajih et al., 2015 IESM2015Paper120 Wajih, E., Jérémie, S., and Nidhal, R. (2015). Cox Regression Model Applied to Pitot Tube Survival Data. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 168 -- 172, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Wang and Disney, 2015 IESM2015Paper77 Wang, X. and Disney, S. (2015). Reducing Order and Inventory Variability under Stochastic Lead-time and Correlated Demand. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 312 -- 321, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Wilbaut et al., 2015 IESM2015Paper212 Wilbaut, C., Benmansour, R., Braun, O., and Hanafi, S. (2015). Iterative relaxation-based heuristic for the single-processor scheduling problem with time restrictions. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 496 -- 501, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Wolfenstetter et al., 2015a IESM2015Paper239 Wolfenstetter, T., Bründl, S., Böhm, M., and Krcmar, H. (2015a). Why Product Service Systems Development is Special. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 1221 -- 1228, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Wolfenstetter et al., 2015b IESM2015Paper237 Wolfenstetter, T., Bründl, S., Füller, K., Böhm, M., and Krcmar, H. (2015b). Towards a Requirements Traceability Reference Model for Product Service Systems. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 1213 -- 1220, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Xu et al., 2015 IESM2015Paper136 Xu, D., Memon, M. A., and Archimede, B. (2015). An environment friendly method to generate dynamic transportation routing in a distributed context. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 702 -- 707, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Youcef and Riad, 2015a IESM2015Paper233 Youcef, Z. and Riad, B. (2015a). Modeling and Dependability Analysis of an Industrial Plant: Case Study. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 1012 -- 1018, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Youcef and Riad, 2015b IESM2015Paper169 Youcef, Z. and Riad, B. (2015b). The Dependability Control Analysis: Applied to centrifugal pumps in a oil petrochemical plant. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 1004 -- 1011, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Zade et al., 2015 IESM2015Paper167 Zade, A. E., Barak, S., Maghsoudlou, H., and Toloo, M. (2015). Multi-objective optimization for Periodic Preventive Maintenance. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 173 -- 182, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Zammori et al., 2015 IESM2015Paper90 Zammori, F., Bertolini, M., and Romagnoli, G. (2015). Assessing performance of Workload Control in High Variety Low Volumes MTO job shops: a simulative analysis. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 362 -- 370, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Zapata-Cortes et al., 2015 IESM2015Paper40 Zapata-Cortes, J. A., Arango-Serna, M. D., and Romano, C. A. (2015). Metaheuristics For Multiobjective Goods Routing. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 99 -- 107, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Zeballos et al., 2015 IESM2015Paper23 Zeballos, L. J., Méndez, C. A., and Barbosa-Póvoa, A. P. (2015). Risk measures in a multi-stage stochastic supply chain approach. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 520 -- 529, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Zheng et al., 2015 IESM2015Paper211 Zheng, D., Zheng, H., Li, D., and Li, M. (2015). An Artificial Bee Colony with Aging Leader in the Elite Group Approach for Intercell Scheduling Considering Transportation Capacity. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 1343 -- 1351, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5. Zheng and Ordieres-Meré, 2015 IESM2015Paper147 Zheng, X. and Ordieres-Meré, J. (2015). Detection and Analysis of Tremor Using a System Based on Smart Device and NoSQL Database. In Proceedings of the International Conference on Industrial Engineering and Systems Management (IEEE-IESM'2015), pages 242 -- 248, Seville, Spain. University of Seville, International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2). ISBN 978-2-9600532-6-5.